Venturi Injector
Faraday manufactures venturi Injectors in engineering plastic as well as stainless steel for various ozone applications and other uses where liquid and gas mixing is neccessary
Faraday has wide range of venturi Injectors from ½ inch to 1½ inch.
- Made of engineering thermoplastics with superior strength, high temperature stability
- Excellent chemical resistance to most of the chemicals.
- No moving parts, low maintenance, trouble free operation.
- Unique design allows maximum cavitation in the injection chamber, thereby providing instantaneous mixing and low initial and installation cost.
- Ideally suited for continues mixing functions, require no secondary blending devices.
- Alternatively where no differential pressure is available, the injector can be operated in conjunction with a small booster pump to boost pressure through injector. The pump needed may be in the range of 0.25 to 0.5 HP and should be able to develop a pressure of 1 to 3.5 kg/cm2 and flow rate of 1500 LPH.
Features
Technical Specification
| Instrument | Direct-reading colorimeter |
| Optics | Faraday dual LED light source optical system with narrow band wavelength filter and photodetectors |
| Wavelength | 530nm |
| Wavelength Tolerance |
± 2nm |
| Filter Bandwidth | 10nm |
| LCD Display | 128 x 64 pixel screen |
| Instrument Operating Temperature Range |
0 – 50°C |
Waterproof Rating |
IP 67 |
| Test Cells | 25 mm diameter tubes |
| Blank/Zero Setting | Held in memory or reset for each reading |
| Size | 150 x 65 x 42 mm |
| Weight | 200g (including batteries) |