Dissolved Ozone Monitor
Dissolved Ozone Monitor or ozone water monitor is the ideal choice for on-line monitoring and control of ozonation systems. Capable of measuring DO 3 concentrations as low as 0-200 PPB full scale
Faraday's industrial Ozone water monitor or analyzer provides the sensitivity needed for demanding applications such as pharmaceutical grade water or semi-conductor wash water.with the standard 0-2 PPM range, the monitor is ideally suited to water bottling systems or municipal water treatment. Even high range applications requiring 0-20 or 0- 200 PPM can be easily accommodated. Utilizing a highly selective polarographic membrane sensor, dissolved ozone can be monitored interference-free, with little maintenance. There are no moving parts and what little maintenance is required can be done in just a few minutes. Installation is simple and you can be up and running in a few hours. Available in loop-powered, AC operated, or battery operated portable versions, the MON-OZ-05 is well suited for almost any DO 3 measurement requirement. Even a portable data-logging version is available for temporary installation or process studies. And for even more flexibility, the instrument is available with an optional pH sensor input that allows a single unit to provide both dissolved ozone and pH analog outputs.
Technical Specification
| Model No | O3 Low Sensor |
| Display Range | 0-200.0 PPB, 0-2.000 PPM, 0- 20.00 PPM, or 0-200.0 PPM |
| Power | 16-35 VDC for loop-powered unit 115/230 VAC, 50/60 Hz., 10 VA max.; |
| Analog Outputs | solated 4-20mA, 550 ohm max. Two assignable 4-20 mA outputs, 550 ohm max. (AC only) |
| Enclosure | NEMA 4X (IP-66) polycarbonate wall, panel, or pipe mount |
| Analog Outputs | 5 lbs. (2.3 Kg) with sensor and Flowcell |